Select Edit Power Message from Set-up Menu

When you enter the Edit Power Message the display will show: Edit Message

7=N 0=Y 8= DF

Pressing key 7 will exit the menu.

Pressing key 8 will restore the default message (Have a good Day’s Racing)

Pressing key 0 will display Power-up message (the cursor is placed at the end of the bottom line, but will not be visible until you press key "4".

The letter "m" is the cursor

Key 1 Capitals (displays "M" when pressed)

Key 2 Lower case (displays "m" when pressed)

Key 3 Punctuation marks (displays "." when pressed)

Key 4 Backspace (steps back and displays "m")

Key 5 Insert a space (inserts a space and displays "m")

Key 6 Numbers ( displays the number "5")

Key 7 Exit and save message.

Key 8 Moves cursor to the end of the top line (cursor only displayed when you press key 4 to backspace)

Key 9 Moves cursor to the end of the bottom line (cursor only displayed when you press key 4 to backspace)

Key 0 Moves to the next letter.

Key * Scroll letters back.

Key # Scroll letters forward.

Below is the order of letters, if the scroll keys are held down the letters scroll round.

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz . _’ , ; : ! ( ) @ + - * / > < & 1234567890^

If you continue to scroll after "^" it returns to "A"

To put the following text into Power-up message follow steps below.

Press key "1" 32 times to clear old message (display will show "m" on top left of display)

Press key "5" 4 times to move cursor to 5^th letter in.

Press key "1" to display Capitals ("M")

Press # key until "P" is displayed then press key "0" to move to the next letter.

Press # key until "r" is displayed then press key "0" to move to the next letter.

Press # key until "o" is displayed then press key "0" to move to the next letter.

Press key "3" to display punctuation marks, then press # key until "-" is displayed, press key "0" to move to the next letter.

Press key "1" to display capitals, press # key until "T" is displayed, press key "0" to move to the next letter.

Press # key until "r" is displayed, press key "0" to move to the next letter.

Press * key until "a" is displayed, press key "0" to move to the next letter.

Press * key until "k" is displayed, press key "0" to move to the next letter.

Press key "5" 6 times to move cursor to bottom line (2 spaces in)

Press key "1" to display capitals, press # key until "S" is displayed, press key "0" to step to the next letter.

Press * key until "a" is displayed, press key "0" to move to the next letter.

Press # key until "y" is displayed, press key "0" to move to the next letter.

Press key "3" to display punctuation marks, press # key until ’ is displayed, press key "0" to move to the next letter.

Press * key until "s" is displayed, press key "0" to move to the next letter.

Press key "5" 2 times, then press key "1" to display capitals, press * key until "H" is displayed, press key "0" to move to the next letter.

Press * key until "e" is displayed, press key "0" to move to the next letter.

Press * key until "l" is displayed, press key "0" to move to the next letter.

Press * key until "l" is displayed, press key "0" to move to the next letter.

Press # key until "o" is displayed, press key "7" to exit, do not press "0" to step to the next letter.

You can re-display the Power-up message by stepping down to Display Pwr Msg, the message is re-displayed and if a tune is entered into Compose Prelude this is also played.

The Charge Message is edited in the same way, to re-display the message after editing step down to Display Chg Msg, the end of charge message is re-displayed and if a tune is entered into Compose Charged this is also played.

If you do not want the message displayed you can configure Pro-Trak not to display either message in the

"Show Pwr Msg " or the "Show Chg Msg" menu.